We can work on a **WINTER** DEAL for YOU! Call or Email!

Contact

Out of Stock

CORSA DryTech 3D Air Filter (#5160) replacement

Brand: CORSA Performance

Part #: 5160


FREE Shipping USA-48 ($200+)

Availability: Chat Below or Call 440-201-9123 or email cory@buyp3.com

PRODUCT DESCRIPTION
*Replacement CORSA DryTech 3D Synthetic Dry Filter

*Not a replacement for stock filter

CORSA Performance DryTech 3D Air Filters maximize power and filtration performance while reducing maintenance. Using specialized hydrophobic polysynthetic fibers, CORSA Performance DryTech 3D Filters boost filtration capacity, lengthening time between maintenance intervals up to 50K miles depending on driving conditions. By vastly increasing media depth through unique pleating geometry, each filter traps more particulate than traditional cone style filters allowing you to drive further before requiring service.

DryTech 3D Filters reduce maintenance time by resisting saturation that occurs during washing, dropping drying time to as little as 2 hours. For an even faster clean, vacuum off surface particulate to restore filter performance. Recommended for consumers who prefer the ease of maintenance of a non-oiled filter but the performance gains of a traditional cotton gauze media.

Will not void Factory Warranty

Cleaning your DryTech 3D: 

One of the benefits of using a DryTech 3D filter is that you can clean and reuse it. Depending on driving and environmental conditions; the filter will become caked with dirt and require cleaning. It is recommended to clean the filter on your CORSA Intake at least two times a year. Replacement filters are available through CORSA. Also, if you experience a sudden decrease in mileage or engine performance, the filter will need to be cleaned. 

QUICK CLEANING:

1. Vacuum free debris from the surface of the filter.
2. Remove the filter from your air intake and tap it on a hard surface to remove any loose dirt.

DO NOT OIL! Oiling your Dry filter will ruin its effectiveness and require immediate replacement.


DEEP CLEANING:

1. Vacuum free debris from the surface of the filter.
2. Remove the filter from your air intake and tap it on a hard surface to remove any loose dirt.

3. Liberally spray the filter with filter cleaner and allow it to soak in for about 10 minutes. Avoid petroleum based products because they will soften and destroy sealing edges.

4. Rinse off the dirt from the inside of the filter out. Never use high pressure nozzles or air; they could tear and distort the cotton gauze media.

5. Allow the filter to air dry in a clean area. Never use applied heat or an air vent to dry the filter. Do NOT reinstall a wet or damp filter. The oiled filter must be completely dry before it is installed.

DO NOT OIL! Oiling your Dry filter will ruin its effectiveness and require immediate replacement.